I love to cruise through my favorite bargain shops- it’s a bit of a fast paced buzz through, scanning quickly aisles and end caps looking for some clearanced cast off that no one wants. Too much time thinking results in a cart full of mediocrity. But if you work fast, only the truly inspirational things jump up and scream “Take me! Take me!
But when I picked it up- it transformed in my imagination into a luxurious place to put up my feet after a busy day- or a great little place to rest a cup of coffee while I curled up in my favorite reading chair.
This is one project that was pretty simple- and with a couple little tips and tricks, anyone could accomplish.
Supplies are minimal:
- A round surface with legs- just imagine all the items you could repurpose! Stools with shortened legs, plywood circles with legs attached…)
- Fabric- enough to cover top and sides and wrap under the surface
- Foam- choose your favorite thickness, factoring in how high you would like the finished project to stand
- Shank style button, large size
- Stapler and staples
- Cambric or a light weight fabric to finish the bottom of the stool.
Step 1- cut the foam to the diameter of the surface being covered. Tip: use an electric knife for easy cutting. I used a good old fashioned bread knife. Not pretty, but effective!
Step 2: cut the fabric, allowing enough additional fabric to cover the top, the sides and at least 3 inches underneath. Trick: tie a string around a pencil with the tail measuring half of the following equation:Diameter+depth of foam+ 3 inches. Hold the tail in the center of fabric and trace a complete circle. Cut out just outside the circle.
Find the center of the foam circle and the center of the fabric circle. (Tip: fold the fabric circle into quarters and pin the point to find the center). With a sharp pointed instrument (open scissor blade, awl, thin knife) poke a hole through both the center point on the foam and the fabric.
Lay the fabric over the foam, right side up. With a strong thread, or dental floss, thread through the button and the foam a few times. Pull quite right and tie off.
Place the fabric covered foam with the fabric face down on a smooth surface. Center the wood surface over the foam.
Now comes the fun part!
Starting at one side, staple the fabric edge approximently 3 1/2 inches from the bottom edge. Then, working directly opposite, pull the fabric tight and staple.
Trick: work the way around leaving large spaces between staples. After placing a staple, immediately work the opposite side to keep the fabric straight and taught. Don’t be afraid to pull tight (but evenly) all the way around for a smooth firm surface. And if necessary, don’t hesitate to remove a few staples to make adjustments if needed.
Once staples are place evenly around the wooden surface, begin softly folding small pleats to take up the slack in the fabric. (Note: if using a foam that is thinner in depth, this may not be required as slack can be eased in as you move around the circle)
Now! Have fun with the staples! After having done a few smaller upholstery projects and removed an unimaginable number of staples- I can be quite sure that inserting staples in massive quantity has therapeutic value. This must be why upholsterers are such happy calm people!
To finish the stool off properly, attach a thin fabric such as cambric or even sewing interfacing to hide the raw edges and staples. Simply cut a circle just shy of the diameter of the top, and while folding under the edge, staple it neatly in place.
Finally- and most importantly- grab yourself a cup of your favorite beverage, sit in your favorite chair and prop your feet up on your beautiful new footstool. You deserve a rest!