Tag Archives: repurpose

Because we all need a little lift- a pot stand turned foot stool

Standard
Because we all need a little lift- a pot stand turned foot stool

I love to cruise through my favorite bargain shops- it’s a bit of a fast paced buzz through, scanning quickly aisles and end caps looking for some clearanced cast off that no one wants. Too much time thinking results in a cart full of mediocrity. But if you work fast, only the truly inspirational things jump up and scream “Take me! Take me!

  
On one of these trips, an odd little four legged pot stand (at least I think that is what it was) made me do a double take. It sat on top of a rickety desk acting like it was 3 feet tall.  

  
But when I picked it up- it transformed in my imagination into a luxurious place to put up my feet after a busy day- or a great little place to rest a cup of coffee while I curled up in my favorite reading chair.  

  

This is one project that was pretty simple- and with a couple little tips and tricks, anyone could accomplish. 

Supplies are minimal: 

  • A round surface with legs- just imagine all the items you could repurpose! Stools with shortened legs, plywood circles with legs attached…)
  • Fabric- enough to cover top and sides and wrap under the surface
  • Foam- choose your favorite thickness, factoring in how high you would like the finished project to stand
  • Shank style button, large size
  • Stapler and staples
  • Cambric or a light weight fabric to finish the bottom of the stool. 

Step 1- cut the foam to the diameter of the surface being covered.  Tip: use an electric knife for easy cutting.  I used a good old fashioned bread knife. Not pretty, but effective!

Step 2: cut the fabric, allowing enough additional fabric to cover the top, the sides and at least 3 inches underneath. Trick: tie a string around a pencil with the tail measuring half of the following equation:Diameter+depth of foam+ 3 inches.   Hold the tail in the center of fabric and trace a complete circle.  Cut out just outside the circle. 

  
Step 3- placing the button

Find the center of the foam circle and the center of the fabric circle. (Tip: fold the fabric circle into quarters and pin the point to find the center). With a sharp pointed instrument (open scissor blade, awl, thin knife) poke a hole through both the center point on the foam and the fabric. 

Lay the fabric over the foam, right side up. With a strong thread, or dental floss, thread through the button and the foam a few times.  Pull quite right and tie off. 

  
Step 4: Stapling the fabric

Place the fabric covered foam with the fabric face down on a smooth surface. Center the wood surface over the foam. 

Now comes the fun part! 

Starting at one side, staple the fabric edge approximently 3 1/2 inches from the bottom edge.  Then, working directly opposite, pull the fabric tight and staple. 

  
Trick: work the way around leaving large spaces between staples. After placing a staple, immediately work the opposite side to keep the fabric straight and taught. Don’t be afraid to pull tight (but evenly) all the way around for a smooth firm surface. And if necessary, don’t hesitate to remove a few staples to make adjustments if needed.  

Once staples are place evenly around the wooden surface, begin softly folding small pleats to take up the slack in the fabric. (Note: if using a foam that is thinner in depth, this may not be required as slack can be eased in as you move around the circle)  
Now! Have fun with the staples! After having done a few smaller upholstery projects and removed an unimaginable number of staples- I can be quite sure that inserting staples in massive quantity has therapeutic value.  This must be why upholsterers are such happy calm people! 

  
To finish the stool off properly, attach a thin fabric such as cambric or even sewing interfacing to hide the raw edges and staples. Simply cut a circle just shy of the diameter of the top, and while folding under the edge, staple it neatly in place. 

Finally- and most importantly- grab yourself a cup of your favorite beverage, sit in your favorite chair and prop your feet up on your beautiful new footstool. You deserve a rest! 

Advertisements

Short and Sweet and to the Point- a handsome nightstand redone

Standard
Short and Sweet and to the Point- a handsome nightstand redone

I have big dreams- and sometimes in my excitement to fulfill them I rush into activity.  But wisdom (and I guess I am getting to the age where this word is now part of my vocabulary) tells me that slow and steady trumps instant and rushed.

Here is one of my dreams: One day, I hope to have a community space where I can share my love of creating and recreating- visions of workshops, retreats and people working on their dreams together-  my little ‘ole heart just starts a-beating!

But for now, I am preparing.. and refining.

Part of this process is found in my garage – a small workspace carved out between my stored boxes of books and camping gear.  And here I get to create beautiful things for beautiful people.


This handsome nightstand, while small in stature, makes a big statement.  It reminds me of a suave gentleman, dressed out in his best white uniform.  (Can you see it too?)

This sat for some time, dejected in my garage, a lone piece that accompanied a set I had purchased.

 With handles missing and scars born in the many moves by its previous owners who were in military service, a little attention was needed.

One day, a friend spotted this nightstand, standing under dust in the corner and asked me to bring it to life for her new home. Now I think of it as an officer and a gentleman.


I didn’t have to work wonders on this piece – it was well made.  But I did have to do some cosmetic work and I was asked to give it a mildly distressed off white finish.

The new black handle pulls were just the thing to finish of his sophisticated look.


He now serves faithfully in my friend’s beautiful room- chivalry at its best 😉
Follow my blog to keep up to date on all my latest adventures.  – and don’t forget to leave feedback! I would love to know what you think

Because the apple doesn’t fall far from the tree – A Family Tree for the wall

Standard
Because the apple doesn’t fall far from the tree – A Family Tree for the wall

I grew up listening to my grandmother recount all kinds of facts about her extended family – Great Aunt So and So who loved fine china and Great Uncle So and So who grew hops out in the country.  It was a blur of names combined with interesting stories of days gone by.  These days, it is my mom who is busy researching her family tree – and she has been pretty successful.  It certainly will make passing family history down a lot easier for me (Thanks Mom!)

This year, as a little token, I decided to make Mom a little family tree for her wall.  Not generations and generations, but just her offspring – because one day we will be not just a little sapling, but a grand old oak.

20141129_220624

I dug into my stash of salvaged cabinet doors.

FullSizeRender

I loved that they easily convert to a “preframed” surface just waiting for something fun.

After a quick primer coat of paint on the front and back, it was a pretty simple process. (You can totally do this!)

Here are the items that are needed to complete this project:

  • 1 salvaged cabinet door  (mine was approximately 12″ x 24″)
  • Paint brush for base coat (1 1/2″ works well)
  • White primer spray paint
  • Painters tape
  • Black chalkboard paint (or black paint with a flat finish)
  • Acrylic paint in your favorite color (for the “frame”)
  • White acrylic paint pen
  • Clear Matte finish coat

Step One:  Prepare surface by applying a thin coat of white primer spray paint to the front and back.  This makes any type of cabinet surface paint-able. Nothing is more disappointing that putting time into something to have it bubble up or slide off!)

20141129_112653

Step Two: Paint the frame and back. It doesn’t take much paint, so a small bottle of your favorite color purchased from a local craft supply store will give you more than enough to put down two good coats. (hint: prevent “oopsies” by taping off the “chalkboard area” with painters tape)

Step Three:  Base coat the “chalkboard”. Two coats will give you a good surface, but if you have a quality paint, one coat may just be all you need! Again, it helps to tape off the portion of the surface that you don’t want to paint – in this case, the freshly painted frame.  Make sure the paint on the frame is completely dry before you tape, or the tape may lift off the paint.

Step Four: Free hand draw, or transfer an outline of a tree.  There are many images online that work well – and you can follow a simple method such as the one used here- to transfer it onto your surface.  While you are at it, you can also free hand or transfer printed text – perhaps your family name, or “Family Tree” – or your favorite quote. (search “curly tree” for inspiration)

Step Five: Outline the transferred image with a medium tipped paint pen.  These pens work great if you are patient.  Shaking them, then pressing the tip onto a piece of scrap paper brings the paint to the tip.  Once wet, it flows pretty smoothly, giving a nice steady line. Add the names of each of the people that branch off the family “trunk” – children on the main branches, and grandchildren on the smaller branches.  Add a sweet pink heart to the trunk of the tree using either a small amount of acrylic paint, or a pink paint pen

 

Step Six: Top coat to protect the painted surface.  Make sure that your work is completely dry before application.  One or two coats of a matte finish varnish or acrylic top coat provides scratch protection as well as some moisture resistance.

Final Step: Attach hangers – such as the ones shown below –  to the back of the plaque.

sawtooth

Display your Family Tree with pride, because one day, your great-great grandchildren will thank you!

Autumn! I’ve fallen for you!

Standard

Deep inside of me, somewhere under the hardworking business women and responsible mother, lies a pensive little girl, who gets giddy at the sight of a tree full of yellow, red and orange leaves – who cautiously looks around before running pell-mell into a pile of leaves and whose mouth waters at the thought of cinnamon spiced apple cider and pumpkin bread.

While I can easily ignore the urge to decorate my porch during the summer – once those leaves start to turn, it becomes a constant hum in my imagination. A hum that can easily turn into a melody that just demands that I hum along!

With that said, I say WELCOME!  to Autumn – to my friends – to my family who make my life a beautiful heap of color.

Welcome sign

While this particular sign is happy on my porch, I am taking orders for any who might be interested.  Made from repurposed pallet boards, this welcome sign has a rustic charm.  It measures 6″x30″ and has a saw tooth hanger at the back, so you can display it in your favorite place. I’m asking only $30.00 each, but will have a limited number that I am able to make.  You can expect the finished product to be ready for delivery or collection 4-5 days from order.